|
|
Bridge over railway line and river
Kalísová, Eva ; Zobek, Svatopluk (referee) ; Panáček, Josef (advisor)
The diploma thesis deals with the design of a bridge in Most. It bridges the railway line and the river Bílina. Three possible variants have been proposed. One of the variants has been selected and further elaborated. The solved variant was an arc with a suspended pre-stressed bridge beam. The supporting element is a reinforced concrete backbone. The construction is built on a ring. Static analysis partly includes the effect of phased construction. The design was assessed according to EN.
|
|
|
Pedestrian bridge across the highway D1 in Bohumín
Muroň, Vlastimil ; Puda, Vladimír (referee) ; Nečas, Radim (advisor)
The aim of final thesis is design and assessment of footbridge over highway D1 in Bohumín. The design is processed in two options. From these two options there is cable-stayed construction solved in greater detail. Because counstruction is in circular arch with small radius, it is necessary to contain real geometry to computational model. Model is created by beams and construction stages are included too. The construction is assessed for the ultimate and serviceability limit state according to valid standards. In the thesis is performed eigenvalue analysis and harmonic response of the construction. Detailed drawings are included too.
|
|
|
Prestressed bridge on the expressway
Juřenčáková, Jana ; Zlatuška, Karel (referee) ; Koláček, Jan (advisor)
The purpose of the diploma thesis is to design a expressway bridge over the river Vsetínská Bečva. The bridge is located between Valašské Meziříčí and Vsetín. Separate superstructures are designed for each directions of the expressway. The right superstructure, which is wider, is considered for detailed design. Two variants were proposed, A double T beam superstructure and a box girder superstructure. The three span box girder superstructure was chosen for the design. Spans are 48+65+48 m long. Two options of construction process of the superstructure were proposed. This bridge is designed according to the limit states, the influence of construction process is considered. Structural models of construction were made as a finite element model and a plate model. Structural analysis, drawings and visualization were developed.
|
|
|
Arch bridge across the valley
Velešík, Marek ; Zlatuška, Karel (referee) ; Nečas, Radim (advisor)
The main focus of this master thesis is the design and assessments of the bridge structure consist of a stress ribbon supported by a steel arch. Three preliminary studies of pedestrian bridges above the valley were created and the one with semi-through deck supported by arch through cables was chosen to detail processing. This thesis includes a chapter, which deals with finding the ideal shape of arch. The computational beam model for the analysis of the structure was created in software Ansys Mechanical including the construction stages. The correctness of the computational model was verified by the secondary model created in the software Midas Civil. For evaluation of the structure in crosswise direction was created slab model in software Midas Civil. The structure was evaluated considering the ultimate serviceability state and ultimate limit state according to currently valid standards. The thesis also includes dynamic analysis.
|
|
|
Design of prestressed bridge near Nitra
Komárková, Petra ; Nováček, Jan (referee) ; Zich, Miloš (advisor)
This Master’s thesis concerns a design of the highway bridge over Nitra River in Nitra, Slovakia. Three variants were designed from which one was selected and analyzed in detail. It is a three box cell girder made of post-tensioned concrete and constructed as a free cantilever bridge. The bridge is assessed according to Eurocodes. The limit states for persistent and transient design situations were taken into account at carrying out the design. There are drawings attached to this thesis as illustrative drawings of the bridge and its construction stages, drawings of the prestress tendons and reinforcement.
|
|
|
Bridge ower railway line
Prekop, Michal ; Russnák, Adam (referee) ; Panáček, Josef (advisor)
Diploma thesis is focused on a design of the road bridge of the category S7,5 in cadastral territory of a municipality Polanka nad Odrou. Three preliminary studies have been proposed. Box girder beam with a slant walls were selected for more detailed processing. Construction of the bridge is going to be build by time-dependent analysis on a solid formwork. The calculation of load is done by using computer software Midas Civil 19 v 2.1. and Scia Engineer 19.1. Selected preliminary was assessed according to the recent Europan standards.
|
|
|
Pedestrian bridge across the highway D1 in Bohumín
Muroň, Vlastimil ; Puda, Vladimír (referee) ; Nečas, Radim (advisor)
The aim of final thesis is design and assessment of footbridge over highway D1 in Bohumín. The design is processed in two options. From these two options there is cable-stayed construction solved in greater detail. Because counstruction is in circular arch with small radius, it is necessary to contain real geometry to computational model. Model is created by beams and construction stages are included too. The construction is assessed for the ultimate and serviceability limit state according to valid standards. In the thesis is performed eigenvalue analysis and harmonic response of the construction. Detailed drawings are included too.
|
|
|
Prestressed bridge on the expressway
Juřenčáková, Jana ; Zlatuška, Karel (referee) ; Koláček, Jan (advisor)
The purpose of the diploma thesis is to design a expressway bridge over the river Vsetínská Bečva. The bridge is located between Valašské Meziříčí and Vsetín. Separate superstructures are designed for each directions of the expressway. The right superstructure, which is wider, is considered for detailed design. Two variants were proposed, A double T beam superstructure and a box girder superstructure. The three span box girder superstructure was chosen for the design. Spans are 48+65+48 m long. Two options of construction process of the superstructure were proposed. This bridge is designed according to the limit states, the influence of construction process is considered. Structural models of construction were made as a finite element model and a plate model. Structural analysis, drawings and visualization were developed.
|
|
|
Bridge over railway line and river
Kalísová, Eva ; Zobek, Svatopluk (referee) ; Panáček, Josef (advisor)
The diploma thesis deals with the design of a bridge in Most. It bridges the railway line and the river Bílina. Three possible variants have been proposed. One of the variants has been selected and further elaborated. The solved variant was an arc with a suspended pre-stressed bridge beam. The supporting element is a reinforced concrete backbone. The construction is built on a ring. Static analysis partly includes the effect of phased construction. The design was assessed according to EN.
|
|
|
Arch bridge across the valley
Velešík, Marek ; Zlatuška, Karel (referee) ; Nečas, Radim (advisor)
The main focus of this master thesis is the design and assessments of the bridge structure consist of a stress ribbon supported by a steel arch. Three preliminary studies of pedestrian bridges above the valley were created and the one with semi-through deck supported by arch through cables was chosen to detail processing. This thesis includes a chapter, which deals with finding the ideal shape of arch. The computational beam model for the analysis of the structure was created in software Ansys Mechanical including the construction stages. The correctness of the computational model was verified by the secondary model created in the software Midas Civil. For evaluation of the structure in crosswise direction was created slab model in software Midas Civil. The structure was evaluated considering the ultimate serviceability state and ultimate limit state according to currently valid standards. The thesis also includes dynamic analysis.
|
guest ::
